Learn how to repair PS4 HDMI port challenge

If you happen to sit all the way down to play your PS4™ and see there's no show, the issue could also be with the HDMI port. However how are you aware for positive? Very similar to different PlayStation® points that cease your sport earlier than it begins, akin to overheating, software program crashes, or controller drift, it's annoying when you may't work out or clear up the issue.

You are reading: How to fix hdmi port on ps4 | Learn how to repair PS4 HDMI port challenge

Right here at Asurion, when tech breaks, we repair it—whether or not your laptop computer battery received't cost or it’s essential to repair your PS4 controller. Right here's our information to discovering out in case your PS4 HDMI port is having points and what to do about it.

Indicators that your PS4 HDMI port might have a difficulty

If the HDMI cable, which sends high-definition footage and sound out of your console to your tv, is plugged into the port however there may be nonetheless no video, the port could also be broken or not working correctly.

Potential indicators of a PS4 HDMI port challenge are:

  • A black display screen or a “No Enter” message.
  • A pixelated or distorted display screen.
  • A good or unfastened port.

Learn how to restore your PS4 HDMI port

The very first thing to do is to examine the HDMI port for indicators of injury. The HDMI port in your PS4 is situated on the higher middle of the again of your console and appears like half of an octagon. Indicators of damage and tear to search for:

  • Damaged or bent pins—this will occur if the wire is continually plugged and unplugged or pushed in too exhausting.
  • Mud and grime—the port might cease working if it's clogged with particles.

If you happen to see bodily injury to your port after checking it or suspect it has a difficulty, you may change it with a brand new port. If you happen to've ever repaired or put in a USB port, this will likely be acquainted to you. If you happen to're not skilled with tech restore, chances are you’ll have to get knowledgeable assist.

Source: findtobeauty.com

What you'll want to interchange your PS4 HDMI port:

  • A soldering gun—an influence instrument used to hitch or separate steel connections through the use of warmth
  • Solder—an alloy with a low melting level that’s used to attach steel elements
  • Desoldering pump—a tool that sucks melted solder away from the pin and board
  • A brand new PS4 HDMI port

After getting all of your instruments readily available, you may get began strolling by these steps:

  1. Use a screwdriver to take away the screws holding the outer case, exhausting drive, and steel plate overlaying the motherboard. Be sure you look out for and disconnect the small plastic connectors as you go.
  2. Take away the motherboard from the underside of the case and find the HDMI port.
  3. When you've situated the port, flip the motherboard over to disclose the pins and anchor factors holding it in place. One anchor level at a time, use your soldering gun to warmth the solder holding the PS4 HDMI port in place on the pins and anchor holes on the board, and use the desoldering pump to take away the melted solder from the board.
  4. After you might have eliminated the previous PS4 HDMI port, clear the realm of the board with a Q-tip and a little bit of isopropyl alcohol.
  5. Utilizing the brand new solder, be sure that the anchor holes are empty, then drop within the new port, line up the pins with the solder pads, and solder it into place.
  6. Reassemble the PS4.

Tip: Be sure that every pin has its personal solder connection—that is the important thing to guaranteeing an information connection. Is your video again on? In that case, you're again within the sport. If it’s not or in case you don't have your individual soldering gun, chances are you’ll want extra assist.

Via @: findtobeauty.com

Category: How to at https://findtobeauty.com.

Article post on: findtobeauty.com

Recommended For You

About the Author: Phuoc Toan